How to clean the Microlog Analyzer dBX touchscreen

Summary

Recommendations for cleaning the Microlog Analyzer dBX touchscreen.

How to clean the touchscreen

Prepare:

• a microfiber cleaning cloth
• 70-75% isopropyl alcohol (isopropanol) or an LCD cleaning solution

Note: Do not use regular cleaners, as they may damage the touchscreen.

Procedure:

1. Turn off the Microlog dBX and examine the screen for any damage.
   
   
2. Spray isopropyl alcohol on the soft cloth and gently wipe the screen to clean off any dirt.
   Note: The soft cloth should not be too wet. Do not spray any cleaning solutions directly onto the screen or leave any liquid on it. You can use water as a substitute if you don’t have any cleaning solutions.
   
   
3. Let the touchscreen dry thoroughly after cleaning. If there are still marks or scratches, gently wipe with a dry cloth, moving in the same direction.

Note: The screen protector, supplied with Microlog dBX, can be used as an additional protection method.  

Contacting SKF Technical Support Group

For further assistance please open a support case using the Technical Support group's self-help portal at www.skf.com/cm/tsg. Once your support case is submitted, a technician will contact you to begin working on your issue. For urgent issues we are available at these times by phone:

• Monday through Friday, 5:00 a.m. to 4 p.m. Pacific Time -
  Phone: [phone] within the US or [phone] outside the US.
• Monday through Friday, 8:00 a.m. to 4:00 p.m. Central European Time -
  Phone: [phone].
• Monday through Friday, 7:30 a.m. to 4:30 p.m. India Standard Time -
  Phone: [phone].